| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Engine Lathe CY6250B,CY6266B Feature |
| ·The headstock, gear-box, apron and bed-ways are made of high quality cast iron, and are all cast with the resin |
| sand foundry technology and aging process. The bed ways are induction-hardened, with hardness around HRC52. |
| ·The spindle supported by 3-pointed high-precision bearings and all gears in headstock are precisely ground, |
| the spindle turns smoothly at high speed. |
| ·High rigidity spindle system, with absolute temperature rising no higher than 35°C. |
| ·Rapid feed system to improve efficiency. Wide range of feed and pitch are available without changing gears, |
| distance between centers 1000-5000mm, this lathe covers wide range of working pieces. |
| ·When rapid feeding is on, the tool slide longitudinal travel handwheel will be automatically nonfunctional. |
| ·Reliable safety devices such as footbrake and emergency power-off switch are assembled. Adjustable overload |
| protection device is also installed in the feed system. |
| ·The tool post adopts the structure of ratchet pawl, and can be relocked by turning the lever for just half a lap. |
| ·Tailstock are equipped with double-locked mechanism, smooth and effortless movement is ensured by the elastic |
| scroll devices underneath. |
| Specifications | CY6250B | CY6266B |
| Swing over bed | 500mm | 660mm |
| Swing over cross slide | 300mm | 430mm |
| Distance between centers | 1000/1500/2000/3000mm | |
| Swing in gap | 710mm | 870mm |
| Width of gap | 240mm | |
| Width of bed | 390mm | |
| Spindle nose | D8 | |
| Spindle bore diameter | 82mm | |
| Taper of spindle center | M6 | |
| Spindle speed | 9-1600rpm | |
| Max. output torque of spindle | 1500N.M | |
| Range of longitudinal feed | 0.028-6.43mm/rev | |
| Range of cross feed | 0.12-2.73mm/rev | |
| Lead screw pitch | 12mm (metric system) 2TPI (inch system) | |
| Metric threads | 0.5-224mm (48 kinds) | |
| Inch threads | 72-1/8TPI (46 kinds) | |
| Module threads | 0.5-112mm (42 kinds) | |
| Diameter pitch threads | 56-1/4DP (45 kinds) | |
| Cross slide travel | 340mm | 360mm |
| Top slide travel | 150mm | 200mm |
| Section specification of tool post | 25x25mm | |
| Longitudinal rapid traveling speed | 4.5m/min (50HZ) / 5.4m/min (60HZ) | |
| Transversal rapid traveling speed | 1.9m/min(50HZ) / 2.3m/min(60HZ) | |
| Morse taper of tailstock center | M5 | |
| Max. travel of tailstock quill | 150mm | |
| Tailstock quill diameter | 75mm | |
| Main motor | 7.5Kw | 11Kw |
| Rapid travel motor | 250W 1360rpm | |
| Coolant pump motor | 90W 25L/min | |
| Standard Accessories | Optional Accessories | |
| ·3 Jaw chuck | ·Face plate | ·Micro stop for saddle |
| ·Thread chasing dial | ·4 Jaw chuck | ·Quick change tool post |
| ·Chip guard | ·Steady rest | ·Damping washer |
| ·Foot brake | ·Follow rest | ·Taper turning attachment |
| ·Oil gun | ·Drive plate | ·Halogen work lamp |
| ·Live center | ·Chuck cover | ·Digital readout (DRO) |
| ·Dead center | ·4-position stop for saddle | ·CE standard compliance |
| ·Center sleeve | ·4-position stop for cross slide |
){kind=link}