| After-sales Service: | 1 Year |
|---|---|
| Warranty: | 1 Year |
| Type: | Horizontal Lathe |
| Guide Rail: | Horizontal Guide Rail |
| Power Source: | Electric |
| Controlling Mode: | Artificial |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | Engine Lathe CY6250L,CY6266L,CY6276L Feature |
| ·The headstock, gear-box, apron and bed-ways are made of high quality cast iron, and are all cast with the resin |
| sand foundry technology and aging process. The bed ways are induction-hardened, with hardness around HRC52. |
| ·The spindle supported by 3-pointed high-precision bearings and all gears in headstock are precisely ground, |
| the spindle turns smoothly at high speed. |
| ·High rigidity spindle system, with absolute temperature rising no higher than 35°C. |
| ·Rapid feed system to improve efficiency. Wide range of feed and pitch are available without changing gears, |
| distance between centers 1000-5000mm, this lathe covers wide range of working pieces. |
| ·When rapid feeding is on, the tool slide longitudinal travel handwheel will be automatically nonfunctional. |
| ·Reliable safety devices such as footbrake and emergency power-off switch are assembled. Adjustable overload |
| protection device is also installed in the feed system. |
| ·The tool post adopts the structure of ratchet pawl, and can be relocked by turning the lever for just half a lap. |
| ·Tailstock are equipped with double-locked mechanism, smooth and effortless movement is ensured by the elastic |
| scroll devices underneath. |
| Specifications | CY6250L | CY6266L | CY6276L |
| Swing over bed | 500mm | 660mm | 760mm |
| Swing over cross slide | 300mm | 430mm | 530mm |
| Distance between centers | 1000/1500/2000/3000mm | ||
| Swing in gap | 710mm | 870mm | 970mm |
| Width of gap | 240mm | ||
| Width of bed | 390mm | ||
| Spindle nose | D8 | ||
| Spindle bore diameter | 105mm | ||
| Taper of spindle center | 1:20 | ||
| Spindle speed | 6-1120rpm | ||
| Max. output torque of spindle | 1500N.M | ||
| Range of longitudinal feed | 0.063-6.43mm/rev | ||
| Range of cross feed | 0.027-2.73mm/rev | ||
| Lead screw pitch | 12mm (metric system) 2TPI (inch system) | ||
| Metric threads | 1-224mm (46 kinds) | ||
| Inch threads | 28-1/8TPI (42 kinds) | ||
| Module threads | 0.5-112mm (42 kinds) | ||
| Diameter pitch threads | 56-1/4DP (45 kinds) | ||
| Cross slide travel | 340mm | 360mm | |
| Top slide travel | 150mm | 200mm | |
| Section specification of tool post | 25x25mm | ||
| Longitudinal rapid traveling speed | 4.5m/min (50HZ) / 5.4m/min (60HZ) | ||
| Transversal rapid traveling speed | 1.9m/min(50HZ) / 2.3m/min(60HZ) | ||
| Morse taper of tailstock center | M5 | ||
| Max. travel of tailstock quill | 150mm | ||
| Tailstock quill diameter | 75mm | ||
| Main motor | 11Kw | ||
| Rapid travel motor | 250W 1360rpm | ||
| Coolant pump motor | 90W 25L/min | ||
| Standard Accessories | Optional Accessories | ||
| ·3 Jaw chuck | ·Face plate | ·Micro stop for saddle | |
| ·Thread chasing dial | ·4 Jaw chuck | ·Quick change tool post | |
| ·Chip guard | ·Steady rest | ·Damping washer | |
| ·Foot brake | ·Follow rest | ·Taper turning attachment | |
| ·Oil gun | ·Drive plate | ·Halogen work lamp | |
| ·Live center | ·Chuck cover | ·Digital readout (DRO) | |
| ·Dead center | ·4-position stop for saddle | ·CE standard compliance | |
| ·Center sleeve | ·4-position stop for cross slide |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}